› ›

Ship Refitting Instruction

eyuhfyeyuhfy Posts: 56Member Beginner
General Discussion
It is explained that this item increases ship rebuild success rate by 30%. 
Does the success rate become 30% even when I use it to a G5 ship combined with G0 material ship?
From what I experienced with Blueprint, I dont believe it works that easy way 
But if it doesnt work, it is quite problematic as it contradicts the description that clearly states 30% increase. 
Can anybody confirm it, plz?

Comments

  • CaptainQCCaptainQC Posts: 57Member Beginner
    from what i know you cant compined a ship g5 with a g0 to make a g6 it will never work.
  • CrzyPsycoChickCrzyPsycoChick Posts: 667Member Intermediate
    Never attempted this but i wouldnt dare try it either.... as even with +30% thats wayyyyyyyyyy too low and if you get fail you can expect your ship to downgrade to G4 ouch. last rank i say go all out dont chance it.
  • HuseyinGaziHuseyinGazi Posts: 158Member Trainee
    There is a system that prevents the negative % value if it is actual below 0,

    For example you want to fuse G2 mainship with a G3 mat double refit that gives about 39 % success rate (without R3 SY or mayor) and with the book it will be 69 %.

    However if you do G2 main ship with a G0 ship, this has 0 % chance but actually there are negative value hidden which is for example -28 %. If you use that book, you will see in practice 2 % success rate for this attempt instead 30 %.

    So you can't apply such a method from the thought you just had :(

    I hope this is clear,

    Kind Regards,
    CulvernCaptainQC
    IGN: [CA]Huseyin_Gazi
    Dedicated Adventurer and Maritimer
    Other toon: Disi_Aslan (trader, production, R20 SB'er and Director of OA)
    Osmanli_Aslanlar
  • CaptainQCCaptainQC Posts: 57Member Beginner
    i know the bonus of the mayor but can you explain what the R3 SY is doing since i have not try go there for fusion.and we need only the R3sy or need more developement?
  • CulvernCulvern Posts: 646Member Intermediate
    The colony SY R3 gives you a 20% fusion bonus.
    And the cost for fusion is reduced as well.
  • WesDoobnerWesDoobner Posts: 761Member Intermediate
    with the R3 shipyard and SRI, it's super easy to grade up to G4. I can make some G3 and G4 LC's in a few minutes, and when you grade a G2 ship with a G3 LC you're getting around 87-91% success rate, and 100% if you want to use a G4 mat instead. Going from G3 to G4 is likewise pretty easy, with about an 88% success rate with G4 mat ship.
    May the winds blow you well
  • CulvernCulvern Posts: 646Member Intermediate
    Just remember when going past g3 it is important to use the correct ship form you want because trying to change later is a real expensive mistake.
Sign In or Register to comment.